Quintum-technologies Tenor VoIP MultiPath User Manual

P/N 480-0036-00-00 1-1® Tenor VoIP MultiPath Switch Tenor VoIP MultiPath Switch, Quintum, Quintum Technologies, Inc. are trademarks of Quin

P/N 480-0036-00-00 1-10Working with SNMPView traps You can view the traps HP Openview received from the Tenor unit as follows: NOTE: Ensure HP Openvi

P/N 480-0036-00-00 1-112. Configure the unit.ORLaunch CLI by double-clicking as follows: Launch Tenor CLI by double-clicking the icon as follows:1. Fr

1-2 P/N 480-0036-00-00Table of ContentsWhat is SNMP?... 1

1-3 P/N 480-0036-00-00What is SNMP?Simple Network Management Protocol (SNMP) is the standard protocol used to exchange network management information.

P/N 480-0036-00-00 1-4Installation Requirements You will need to install and run HP Openview NMS 6.0 in order to recognize the Tenor as an SNMP agent.

P/N 480-0036-00-00 1-5InstallationThere are two steps you need to accomplish before HP Openview can interact with a Tenor unit as an SNMP agent. • Dow

P/N 480-0036-00-00 1-6• These lines are added to the file HPOVRoot\conf\oid_to_sym:1.3.6.1.4.1.6618.1.1.1:Connector:QDVOIP # QUINTUM Digital Te

P/N 480-0036-00-00 1-7EDESC• The quintum.exe file is added to the HPOVRoot\bin directory.• These files are added to the HPOVRoot\bitmaps\C directory:

P/N 480-0036-00-00 1-81. Click on Start> Run. The Run window will appear. 2. Type telnet in the Open box and click on Ok. 3. Click Connect> Remo

P/N 480-0036-00-00 1-98. At the Password prompt, enter the same password you set via Tenor CAMWizard.9. At the Quintum prompt, type config sys snmptra